Anti corrosion of biogas desulfurizer is very important. What are the requirements for anti-corrosion of desulfurizer? The following Xiaobian will give you a specific introduction.
1. The spraying surface of the inner wall of the equipment shall be flush, and the weld surface shall be flat without welding slag, overlap and burr. The inner edge of flange nozzle and other corners shall be polished into a smooth transition with a fillet radius of not less than 5mm. The inner parts shall be polished into smooth transition (carbon steel part) with fillet radius not less than 2mm.
2、設備噴鋁表面需按下列步驟和要求進行表面處理：
2. The aluminum sprayed surface of the equipment shall be subject to surface treatment according to the following steps and requirements:
(1)凈化處理：噴鋁表面需經(jīng)嚴格地清除油脂和污垢。
(1) Purification treatment: the aluminum spraying surface needs to be strictly cleaned of grease and dirt.
(2) Roughening treatment: the cleaned surface shall be subject to sandblasting treatment. The surface cleanliness after sandblasting shall meet the requirements of grade SA3 in gb8923-88. No oxide scale, rust dirt, old coating and other attachments are allowed.
(3) After the surface treatment is qualified, the waiting time for aluminum spraying shall be shortened as far as possible, and the sandblasted surface shall be strictly protected from moisture, dust, oil and other pollution.
The above is a detailed introduction about biogas desulfurization. I hope it can help you. If you have any questions, please contact us. We will provide you with services in a professional manner http://m.nittopsr.com
企業(yè)二維碼
2022-09-05
魯公網(wǎng)安備37011202000764號號